The visible logo surface. It can be clear, milky white, frosted, black, colored, mirror-finished, printed, or layered.

The light source behind, inside, or along the acrylic structure. It creates backlit, front-lit, edge-lit, dual-lit, or acrylic neon effects.

The support system behind the logo, usually planned with acrylic backing, metal back panel, PVC support, standoffs, or hidden mounting.

The cable position should be planned before production so the finished sign does not leave visible wires across a clean wall.

Adapter, plug type, voltage, dimmer, and controller details should match the destination market and installation method.

Screws, standoffs, hanging parts, templates, and wall-mount accessories help local installers position the sign correctly.

Thin logo lines may break during acrylic cutting, look weak after lighting, or leave no room for LED placement.

• Check minimum stroke width
• Strengthen fragile areas when needed
• Keep the main logo recognition

Small taglines, tiny service words, or fine letter details may become unreadable after cutting or lighting.

• Enlarge small text when possible
• Use printing or engraving for tiny details
• Separate non-lit details from the main logo

Dots, icons, decorative marks, and separate logo fragments may need hidden support or clear acrylic backing.

• Support isolated shapes
• Use transparent backing when needed
• Keep installation practical

Sharp inside corners and narrow gaps may create weak points, rough edges, or shadow pockets after lighting.

• Review cutting paths
• Refine risky inside corners
• Choose a better lighting structure if needed

A logo can be cut cleanly but still lack enough room for LEDs, which may create dim light, hot spots, or dark areas.

• Check internal light space
• Adjust LED layout around corners
• Choose backlit, front-lit, or edge-lit based on structure

Acrylic color and LED color can shift after illumination, so daytime and night effects should be considered together.

• Review acrylic color and LED color together
• Check warm, cold, RGB, or brand color options
• Use sample proof for strict brand projects

A sign that looks good on a production table still needs to fit the wall, outlet position, mounting height, and installation route.

• Use wall photos before production
• Plan mounting holes early
• Confirm cable route before assembly

Indoor and outdoor acrylic LED logo signs need different wiring, sealing, mounting, power, and material protection.

• Confirm use environment
• Choose waterproof options when needed
• Plan power and cable protection

18+ years of LED sign design and manufacturing experience for custom commercial signage projects.

More stable support for samples, small batches, mixed products, and larger custom LED sign projects.

Enough space for cutting, assembly, aging tests, packing, and project handling across different sign types.

A deeper production team than a small workshop or trading-only supplier.

Useful for logo-to-sign artwork, free design support, mockups, 3D rendering, and approval files.

Important for acrylic structure, lighting layout, wire exit, mounting method, and waterproof planning.

Helps check acrylic surface, edge finish, lighting, wiring, mounting parts, and packing before shipment.

Supports samples, small batches, multi-SKU orders, store programs, and repeat commercial projects.

Supports different LED sign structures, acrylic processing, assembly needs, and custom project requirements.

Useful for repeat orders, store programs, agency projects, and mixed custom LED sign orders.

Experience with global packing, plug types, logistics, communication, and international project expectations.

Helpful for clients serving US, EU, and global commercial sign markets.

Protective film and soft wrapping help prevent scratches on clear, milky, black, mirror, printed, and layered acrylic surfaces.

• Protective film
• Soft inner wrapping
• No direct contact with screws
• Useful for close-view signs

Contour-cut acrylic signs often have thin or irregular edges that need extra cushioning during transport.

• EPE foam
• Pearl cotton
• Corner guards
• Extra padding for irregular shapes

Wire exits, cable connectors, dimmers, and RGB controller connections should be fixed and protected before packing.

• Fix cable position
• Avoid sharp cable bending
• Protect connectors
• Separate cables from heavy parts

Power adapters, plugs, dimmers, remotes, RGB controllers, and extension cables should be packed separately.

• Separate power section
• Adapter protection
• Controller protection
• Grouped by store when needed

Screws, standoffs, spacers, brackets, connectors, and small parts should be packed in individual bags.

• Screw bags
• Standoff bags
• Mounting hardware bags
• Store or section grouping

Small and medium acrylic signs still need strong outer protection because shipping pressure can bend or damage edges.

• Thickened carton
• Inner cushioning
• Reduced product movement
• Useful for standard shipments

Large wall signs, oversized acrylic panels, heavy layered signs, and storefront signs may need wooden frame packing.

• Stronger outer protection
• Foam inside the frame
• Corner protection
• Useful for oversized signs

Chain projects need packing clarity so signs, adapters, screws, and mounting parts do not get mixed across locations.

• Pack by store
• Group power parts by location
• Separate accessory bags
• Reduce installer sorting time

Send AI, SVG, PDF, CDR, high-resolution PNG, or high-resolution JPG files for logo review and production drawing.

• Vector files are best
• Photos can be reviewed first
• Thin strokes may need checking

Send overall width, height, wall size, counter size, storefront width, or approximate installation area.

• Helps control sign scale
• Affects acrylic thickness
• Affects LED layout and packing

A simple phone photo helps check wall color, wall texture, power position, cable route, and available space.

• Useful for backlit halo effect
• Helps plan wire exit
• Reduces installation guesswork

Tell the factory whether the sign is for an indoor wall, semi-outdoor entrance, outdoor storefront, humid area, or event booth.

• Indoor signs focus on finish
• Outdoor signs need sealing
• Power and cable protection may change

Choose backlit, front-lit, edge-lit, dual-lit, layered acrylic, acrylic neon, or ask for advice if unsure.

• Backlit for soft halo
• Front-lit for visibility
• Acrylic neon for atmosphere

Send acrylic color, LED color, brand color reference, daytime look, and preferred lit effect.

• Clear, milky, frosted, black or mirror acrylic
• Warm white, cold white, RGB or brand color
• Daytime and lit colors should both be checked

Send wall-mount, standoff, hanging, back-panel, counter-display, raceway, or hardwired installation preference if known.

• Affects hole position
• Affects back structure
• Affects accessory packing

Choose back wire exit, side wire exit, bottom wire exit, hidden cable path, plug-in route, or hardwired route.

• Prevents visible cable problems
• Should match power location
• Needs confirmation before assembly

Send destination country, plug type, voltage requirement, and any local installer power requirement.

• US, UK, EU, AU options
• Adapter or transformer planning
• Outdoor power protection when needed

Tell us whether the order is one sample, one store sign, small batch, multi-store rollout, agency project, or sign company order.

• One piece is supported
• Batch orders need records
• Rollouts need packing control

Send store opening date, event date, installation date, sample approval deadline, or required shipping method.

• Regular 1 pc models usually 5–7 days
• Special-process signs may need 7–15 days
• Large orders receive a production schedule

Send whether the project needs standard carton, stronger packing, wooden frame, store-by-store packing, accessory grouping, or packing photos.

• Protect acrylic surface and edges
• Separate power and screws
• Useful for multi-store projects